Summary
Chapter 7 of the Adams School of Dentistry's (ASOD) Infection Control Manual explains the ASOD's requirements for Personal Protective Equipment (PPE). This includes types of approved PPE, PPE per procedure/area, approved and denied areas for PPE, PPE specifications, PPE donning protocol, PPE doffing protocol, and PPE training.
Body
Definitions
- ASTM Level 2 or Level 3: International standard.
- BBP: Blood borne pathogens
- Extraoral: Outside the mouth
- Intraoral: Inside the mouth
- Loops: Specialized eyewear with magnification built in
- Operatory: Room where patient care is provided
- OPIM: Other potentially infectious materials
- PPE: Personal Protective Equipment
- Radiopgrahs: Dental X-rays
Types of Approved PPE
Use of Personal Protective Equipment (PPE) is required both legally and by establish policies for all clinical and/or laboratory work. Listed below are the different types of PPE available and appropriate use of each.
- Gowns
- Disposable Clinical Gown
- Reusable Clinical Gown
- Masks
- ASTM Certified Level 2 or Level 3 Mask
- N95 Mask
- Respirator Mask
- Eye Protection
- Safety Glasses
- Safety Goggles
- Face Shield
- Disposable Side Shields
- Loops With Side Shields
- Gloves
- Disposable or Treatment Gloves
- Sterile Gloves
- Protective Cap
- Reusable Head Covering
- Disposable Head Bonnet
- (Optional) Disposable Shoe Bonnet
- Safety Footwear (Shoes)
- Closed-toe, with no holes across the toes and top of foot
- Preferably all leather, for ease of cleaning
- Mesh on sides of shoes are permitted
- ANY opening on the top or front of shoes are NOT permitted
PPE per Procedure / Area
Different procedures require different types of PPE, with the most common procedures listed below. The easiest method is to assume that if the patient is in an operatory, all PPE should be worn. At no point is ANY PPE allowed to be worn outside of the clinical or instrument processing areas! Consequences of wearing PPE outside of these areas can result in repercussions outlined later in this manual.
Patient is Masked in Operatory
- Gowns must be worn in the operatory
- ASTM Level 3 mask or N95 mask
- Reasoning: No splatter, aerosols, or touching the patient is involved
Patient is UNMASKED in Operatory and Prior to Treatment
- Gowns must be worn in the operatory
- Gloves must be worn while touching the plastic covered keyboard
- Face shield or appropriate eye protection is required
- ASTM Level 3 mask or N95 mask
- Reasoning: It is easier to remember to always wear PPE than specific PPE for different situations. If patient is unmasked, pathogens/aerosols are being released/generated.
Intra-Oral Examinations
- Any procedure that produces debris, spatter, or aerosols, including, but not limited to, oral cancer screening, prophylaxis, operative dental procedures, and surgical dental procedures.
- All PPE is required for provider including gown, mask (surgical, N95, or respirator), face shield, eye protection, gloves, and/or cap/bonnet.
- Patients are required to wear safety glasses.
- Reasoning: Production of aerosols requires full PPE protection for operator.
Radiographs: Intra-Oral & Extra-Oral
- Gown, mask, face shields / eye protection, and gloves are required when exposing intra-oral and extra-oral radiographs.
- Reasoning: Close contact with patient is necessary and is required to wear PPE.
Instrument Processing
- Gown, mask, face shield / eye protection, and gloves are required when working directly with contaminated instruments.
- Areas include Dispensary, Receiving, Decontamination, Wrapping, and Sterilization.
- Reasoning: Close contact with BBP, OPIM, contact with contaminated instruments, and splashes are likely, which requires the use of full PPE.
Approved & Denied Areas for PPE
Scrubs and clinically appropriate footwear is allowed to be worn in all locations. All other items listed under "Types of Approved PPE" are subject to the following restrictions.
Acceptable Locations
- Clinical Areas
- Patient Care Areas
- Dispensary
- Laboratory
Unacceptable Locations
- Waiting rooms
- Hallways
- Restrooms
- Common Areas
- Koury Hall
- Atrium
- Food Center
- Stairwells
- Elevators
PPE Specifications
Gowns
- Requirements are subject to change, depending on recommendations from US Centers for Disease Control and Prevention (CDC) and any outstanding communicable disease
- If gown becomes wet or soiled, gown must be removed and discarded in either marked laundry bin or marked bio-hazard waste receptacle.
Masks
- Requirements are subject to change, depending on recommendations from the CDC and any outstanding communicable disease
- Disposable masks must be ASTM Level 2 or Level 3
- Masks also include respirators, N95, and K-N95
- Must fully cover nose, mouth, and chin
- Approved masks must be worn during any clinical procedure involving the generation of aerosols or spatter to protect the mouth and nose from airborne infectious agents.
- Masks must fully cover nose, mouth, and chin.
- Applies to provider, assisting personnel, visitors in the operatory, and persons providing direct patient care.
- Masks are to be changed between patients or when visibly soiled
- Instructors are to change the disposable mask if aerosols are produced during check steps
Eye Protection: Loops, Glasses, & Goggles
- Requirements are subject to change, depending on recommendations from CDC and any outstanding communicable disease.
- Eye protection includes safety glasses, glasses with disposable side shields, and loops with solid side shields that are meant to protect the eyes from debris and infectious spatter.
- Eye protection should fit snuggly over and around eyes and secured to head by using earpieces or headband.
- Must be worn whenever there is generation, or probable generation, of spatter and/or aerosols.
- Patients must wear safety glasses, which are shatterproof with solid side shields, whenever in the dental chair.
- Safety glasses may be placed over prescription glasses.
- Patient’s receiving treatment cannot substitute prescription glasses for safety glasses.
- Student-providers are issued 2 pairs of safety glasses upon matriculation and are responsible for using these safety glasses for their patients.
- Protective eyewear used by clinician and patients during treatment must be disinfected after each visit. Disinfection is completed through the following process:
- Rinse safety glasses with water to remove debris.
- Wipe safety glasses with disinfectant and allow to sit for at least one (1) minute.
- Rinse safety glasses again with water.
- Dry safety glasses with clean paper towel.
- Loops should be disinfected per the loop manufacturer’s recommendations after each patient encounter that produces spatter and aerosols.
- Most loop manufacturers will replace side shields that have been lost or broken at no cost.
- Each provider is responsible for contacting the manufacturer for replacement.
Eye Protection: Face Shield
- Requirements are subject to change, depending on recommendations from CDC and any outstanding communicable disease.
- Face shields protect the entire face from hazards and generally extend from the forehead down, protecting the eyes, nose, and mouth from splatter, but not from aerosols.
- Should cover forehead, extend below chin, and wrap around both sides of the face.
- After patient treatment is completed, the shield should be removed and disinfected in the same manner as eye protection.
Disposable / Treatment Gloves
- Must be worn whenever performing and/or assisting in all intra-oral procedures to protect the hands.
- Must be worn in laboratory settings when there is sufficient probability of exposure to blood and/or OPIM.
- Must be worn when handling equipment, instrument, and other items which have been contaminated with blood and/or OPIM, prior to being disinfected.
- Wearing disposable treatment gloves outside of the clinical operatory area where residents, students, faculty, or staff is strictly prohibited.
- Environmental Services and individuals specifically disinfecting items outside of the clinical setting are exempt from above restriction.
- No disposable treatment gloves are ever to be washed or disinfected, then re-used for any purpose.
- All gloves must be changed between patients.
- Must be removed before touching drawer handles, chairs, and non-sterile items to avoid contamination of clean supplies.
- All consumable items should be removed from holding containers by using clean cotton pliers or forceps and clean, un-gloved hands.
Sterile Gloves
- Must be worn in performing and/or assisting in all surgical procedures, which includes, but not limited to, access to bone, sub-cutaneous tissues, and so forth.
- All gloves must be changed between patients.
- Must be removed before touching drawer handles, chairs, and non-sterile items to avoid contamination of clean supplies.
- All consumable items should be removed from holding containers by using clean cotton pliers or forceps and clean, un-gloved hands.
Protective Cap
- When gross contamination can be reasonably anticipated, a surgical cap/bonnet must be worn by all surgical personnel and should also be worn by the patient during the surgical procedure (oral surgery and periodontal surgical procedures).
- With respect to extracting teeth, anything other than a simple extraction is considered a surgical procedure and a cap/bonnet must be worn.
- Use of a surgical cap/bonnet is also recommended for other procedures that may produce large amounts of aerosols (i.e., use of high-speed handpiece and ultrasonic scaler).
Safety Footwear (Shoes)
- Safety footwear that are closed-toe, protect the top portion of the foot from dropped instruments, and slip-resistant are required in all clinical, laboratory, and/or research areas.
- Closed-back shoes are strongly recommended but not a requirement set by current OSHA regulations or UNC policies.
- Applies to all providers, assisting personnel, persons providing direct patient care, and all visitors.
- Patients are exempt from this requirement but are encouraged to wear closed-toe shoes.
- General requirements are outlined by OSHA, per 1910.136(a).
- For a complete list of protective shoe requirements, refer to ASTM F2413, subsections I/30, Mt/30, and PR. In order, these sections include impact protection (toes), metatarsal protection, and puncture resistance.
Protocol for Donning (Putting On) PPE
- Perform hand hygiene.
- Put on clean gown that covers personal clothing and skin.
- Put on clean protective cap/bonnet.
- Put on ASTM Level 2 or 3 surgical mask, N-95, or respirator.
- Fit flexible nose piece over nose bridge and secure to head with ties or elastic straps, fitting snuggly.
- Using fingertips of both hands, slide down both sides of metal strip to mold to nose.
- Respirator straps should be place on the crown of the head (top strap) and the base of the neck (bottom strap).
- Perform a positive and negative user seal each time you put on a respirator.
- Put on face shield and/or appropriate eye protection.
- Perform hand hygiene.
- Put on clean non-sterile gloves
- Ensure comfortable, snug fit on the hand and wrist
- Should not be too loose or overly tight
- Loose includes, but not limited to, excess room where glove material bunches up around fingers and/or wrist
- Overly tight includes, but not limited to, glove material stretching over palm of hand when hand is fully extended
- Extend gloves over cuff of gown
Protocol for Doffing (Removing) PPE
- Remove gloves
- Pinch opposite glove at the inside of the wrist and peel off by inverting it.
- Roll inverted glove into gloved hand.
- Take finger of ungloved hand and slip under the wrist of gloved hand.
- Peel off glove by inverting over first glove.
- Discard into a biohazard waste container.
- Perform hand hygiene.
- Don new, clean set of gloves to remove contaminated items and disinfect operatory.
- Remove gloves as indicated in Step 1 above and perform hand hygiene.
- Remove new, clean set of gloves again.
- Remove gown
- Touching only the back gown straps, untie and peel away from the neck and shoulders.
- Turn outside toward inside, rolling into a bundle and discard in appropriate receptacle.
- Remove eye protection and/or face shields by only touching straps and pulling upwards, away from head.
- Remove ASTM Level 2 or 3 Mask or N95/Respirator.
- Touching only the straps or ear loops, remove by pulling over head and away from face.
- N95 masks and respirators should be removed by bottom strap first, then remove the top strap.
- Remove cap or bonnet and store in a disposable bag or place in biohazard receptacle.
- Remove gloves as indicated in Step 1 above and perform final hand hygiene.
PPE Supplemental Aids & Instructions
If additional aids are necessary for donning or doffing procedure, review the information listed below or contact send an email to ASOD_ClinicalCompliance@unc.edu.
- Reducing accidental contamination
- Always work from clean to dirty by touching only clean body sites or surfaces before touching anything dirty of contaminated
- PPE selection
- Additional guidance on appropriate selection of PPE can be reviewed through the CDC training video.
- PPE disposal
- All PPE is required to be disposed of in appropriately labeled receptacles.
- Failure to utilize the correct receptacle can place others at risk!
- Appropriately labeled receptacle:
PPE Training
Appropriate training on the selection, use, and location of PPE is provided either through clinical orientation for clinical faculty and staff, or through relevant course material for students. In certain instances, additional training may need to be provided in the following situations:
- Workplace changes render prior training obsolete;
- Availability of specific PPE changes and renders prior training obsolete; and/or
- Inadequacies are observed in knowledge or use of assigned PPE that indicate the student, faculty, or staff has not retained an understanding of PPE training.
Back to Chapter 06
Proceed to Chapter 08