Environment, Health and Safety Manual - Chapter 05.07: Occupational Safety Policies - Chemical Waste Disposal

Summary

As a generator of hazardous waste, the University is required to comply with federal standards promulgated by the Environmental Protection Agency (EPA) and the Department of Transportation (DOT). These regulations require documentation of the transfer of hazardous waste from the point of generation to it’s final disposal.

Body

Title

Environment, Health and Safety Manual - Chapter 05.07: Occupational Safety Policies - Chemical Waste Disposal

Policy

As a generator of hazardous waste, the University is required to comply with federal standards promulgated by the Environmental Protection Agency (EPA) and the Department of Transportation (DOT). These regulations require documentation of the transfer of hazardous waste from the point of generation to it’s final disposal. Each waste generator, (ie; lab), is responsible for correctly identifying the hazardous waste generated in his/her work area, thereby ensuring proper transportation and disposal. The Department of Environment, Health and Safety assists by picking up and transporting the waste back to the Hazardous Materials Facility, then preparing the waste for off-site disposal by treatment, energy recovery, or reclamation.

Waste containers must be:

  • Labeled with the words “Hazardous Waste” or other clear chemical identification
  • Securely closed except when material is being added or removed
  • Placed in secondary containment if the container is a liquid, and in quantities of 4 liters or less, or if the container is made of glass and is stored on the floor.

For laboratories on campus (teaching labs, research labs, art labs, photo labs, field labs, diagnostic labs in teaching hospitals, and areas that support labs such as chemical stockrooms or prep rooms), waste containers must be:

  • Labeled with the words “Unwanted Material”, full chemical names of each component with percentages, the accumulation start date, and whether the unwanted material is used or unused
  • Securely closed except when material is being added or removed
  • Placed in secondary containment if the container is a liquid, and in quantities of 4 liters or less, or if the container is made of glass and is stored on the floor

See the Laboratory Safety Plan, Chapter 12 for all policies concerning hazardous waste generated in laboratories.

For chemical waste removal, please complete an online waste disposal form. A separate form must be completed for each different chemical. The approved chemical waste form, or e-510 form, is to be attached to the container. The Department of Environment, Health and Safety transport the waste to the UNC Hazardous Material Facility (HMF) for segregation and repackaging prior to treatment, energy recovery, reclamation or off-site disposal.

Waste Minimization

The most significant way that University employees can assist in the management of hazardous waste is to reduce the volume of waste required to be handled by the Department of Environment, Health and Safety. Laboratories are encouraged to consider ways of reducing the volume of waste or preserving the usability of the materials through the redesign of experiments. Support services are encouraged to explore the use of nonhazardous cleaners, paints and solvents. Recyclable materials should be kept separate from other waste. The Department of Environment, Health and Safety welcomes ideas and suggestions about how production of hazardous waste can be reduced through source reduction, recycling, redesign of experiments, or decontamination.

EPA Hazardous Waste

Current EPA regulations apply to wastes having the following characteristics:

  • Ignitability: liquids with a flash point of less than 60°C (140°F); oxidizers; flammable gases; and solids capable of burning vigorously and persistently after ignition through friction, absorption of moisture, or spontaneous chemical changes at standard temperature and pressure.
  • Corrosivity: aqueous solutions with a pH less than or equal to 2 or greater than or equal to 12.5; liquids which corrode steel at a rate greater than 6.35 mm per year at 55°C.
  • Reactivity: chemicals normally unstable that undergo violent change, react violently with water, form potentially explosive mixtures with water, emit toxic vapors when mixed with water, capable of detonation or explosive reaction.
  • Toxicity: 43 specified heavy metals, solvents and pesticides.
  • Listed wastes: discarded commercial chemical products or off-spec commercial chemical products. The EPA specifically names over 600 chemicals which are hazardous due to toxicity, reactivity and/or ignitability.

Additional Wastes

EPA hazardous waste regulations do not address many materials used in research activities which pose a threat to health when not managed properly. These include mutagens, carcinogens, teratogens, oils, refrigerants, herbicides, pesticides, cleaners, and controlled substances. By-products associated with nanotechnology are also deemed to be hazardous waste, and managed by the Department of Environment, Health and Safety.

Further Reference

All lab occupants who handle chemicals must take this online training course.

Contact Information

Primary Contact

Environment, Health and Safety
1120 Estes Drive
Campus Box #1650
Chapel Hill, NC 27599-1650
Phone: 919-962-5507

Back to Chapter 05.06 - Use of Chemical Carcinogens

Proceed to Chapter 05.08 - OSHA Bloodborne Pathogens Standards

Details

Details

Article ID: 131961
Created
Thu 4/8/21 9:20 PM
Modified
Mon 7/4/22 1:55 PM
Responsible Unit
School, Department, or other organizational unit issuing this document.
Environment, Health and Safety
Issuing Officer
Name of the document Issuing Officer. This is the individual whose organizational authority covers the policy scope and who is primarily responsible for the policy.
Issuing Officer Title
Title of the person who is primarily responsible for issuing this policy.
Executive Director
Next Review
Date on which the next document review is due.
09/01/2026 12:00 AM
Last Review
Date on which the most recent document review was completed.
10/30/2019 11:49 AM
Last Revised
Date on which the most recent changes to this document were approved.
10/30/2019 11:49 AM
Effective Date
If the date on which this document became/becomes enforceable differs from the Origination or Last Revision, this attribute reflects the date on which it is/was enforcable.
10/30/2019 11:49 AM
Origination
Date on which the original version of this document was first made official.
04/01/2012 12:00 AM